For professional installers

Downloads

The latest KLAR-NET firmware and the matching Configurator. Always use the two files listed together on this page.

Keep the engine running during an update. Do not unplug the USB cable or close the Configurator until it says "Updated". The firmware file only installs on genuine, licensed KLAR-NET units.

Current release

Firmware FW35 · Configurator 4.47

Released November 2026.

Firmware update

KLAR-NET firmware

Version FW35

Install it from the Configurator's Tools tab. Settings are normally kept, but save a backup first.

KLAR-NET_FW35.enc Download firmware
Software

KLAR-NET Configurator

Version 4.47

Save the file to the laptop and open it in Google Chrome or Microsoft Edge. No installation needed.

KLAR-NET_Configurator_4.47.html Download Configurator

What's new

How to update

Installing the update

You need a laptop with Google Chrome or Microsoft Edge (Windows or Mac) and a USB-C cable.

  1. Download

    Download both files above and save them on the laptop.

  2. Connect

    Start the engine, connect the laptop to KLAR-NET's USB-C port, open the new Configurator and press Connect.

  3. Back up

    Press Save to file to keep a copy of the current settings.

  4. Update

    On the Tools tab, press Choose File, select KLAR-NET_FW35.enc and press Start update. It takes about a minute; wait for "Updated".

  5. Check

    Reconnect, press Read from board and check your settings. If anything is missing, use Load from file and Save to board.

Need help? Contact EuroLab before updating a customer's car. The full Configurator guide is on the Installation page.