KLAR-NET

For BMW iDrive 7 · 8 · 8.5

Keep your BMW.
Upgrade the sound.

KLAR-NET taps your car's digital audio before it reaches the factory amplifier and feeds a clean, bit-perfect optical signal to the aftermarket DSP amp of your choice — while every button, chime and parking beep keeps working exactly as before.

Bit-perfect up to 96 kHz 2× optical out No screen replacement Factory controls kept

What it does

A clean digital bridge between your BMW and a real hi-fi system

No speaker-level splicing, no re-recording, no replacing the screen. KLAR-NET works on the car's own digital audio link and leaves the factory experience intact.

Lossless digital tap

Audio is taken as pure digital data, not read back from speaker wires. Your amp receives exactly what the head unit sends.

Keep the factory system

Your iDrive screen, volume knob, steering-wheel buttons and menus all stay. Nothing is torn out or covered over.

Two optical outputs

Feed a premium DSP amplifier over TOSLINK — front and rear — for a true multi-channel install.

Every chime still plays

Navigation prompts, warning gongs, indicator clicks and parking sensors are mixed in at the right point, so you never miss them.

Built-in centre channel

An on-board amplifier drives a dedicated centre speaker, with its own independent level control.

Volume that follows you

The factory volume knob and steering-wheel controls set the level on your aftermarket amp automatically.

Set up in a browser

Plug in over USB and configure everything from a web page. No app to install, and firmware you can keep up to date.

Adapts on its own

KLAR-NET senses what the car is doing and switches between its operating modes automatically.

How the signal flows

One tap in, your whole system out

KLAR-NET sits in line between the head unit and the car's amplifier. Pick a mode to see how it routes the sound.

music · nav · chimes · PDC Head unitiDrive 7 / 8 / 8.5 KLAR-NETdigital tap Your DSP ampoptical in Main speakers Centre speakerKLAR-NET on-board amp

◂ swipe the diagram ▸

Auto — hands-off RECOMMENDED

KLAR-NET chooses for you: it runs bit-perfect to your amp while the car is playing, and steps aside to the amplifier's own Bluetooth when the car goes quiet. Set it once and forget it.

How to use it

Three steps, then you just drive

Installed in line

A professional installer connects KLAR-NET in line on the car's digital audio link. The factory wiring loom is not cut.

Configured once

Everything is tuned from the browser Configurator over USB — inputs, levels, modes, and a per-speaker test tone.

Just drive

Use your car exactly as before. KLAR-NET works quietly in the background and needs no attention day to day.

Nothing is lost

Everything you use every day still works

KLAR-NET is designed to be invisible in use. The parts of your car you rely on carry on untouched.

Volume knob & steering controlsSet the level on your aftermarket amp directly.
Navigation & phone promptsSpoken guidance is mixed in and never muted.
Parking sensors (PDC)Front and rear beeps play through the right channels.
Warning gongs & chimesEvery safety sound comes through clearly.
Radio, media & sourcesFM, DAB, Bluetooth and USB all carry on as normal.
The factory lookNo screen swap, no visible aftermarket gear.
Optional

Hi-Res Player — 24‑bit straight to your amp

Add the optional Hi-Res Player and play 24-bit studio-quality files from a USB stick, decoded and sent to your amplifier without passing through the car's standard audio path.

Live metering on the car's own screen — bit depth, loudness and spectrum, with 24 of 24 bits reaching KLAR-NET.

Hi-Res Player running on the head unit

The honest picture

What's great, and what to know

Strengths

  • Keeps the complete factory experience — controls, screen and chimes.
  • Truly lossless, bit-perfect digital audio to your amplifier.
  • Full multi-channel: front, rear and a dedicated centre.
  • Factory volume and steering controls drive the aftermarket amp.
  • Works across iDrive 7, 8 and 8.5, and is configurable and updatable.

Good to know

  • Professional installation recommended — it connects inside the car's audio path.
  • Built for specific BMW systems — check your model and head unit fit first.
  • Full remote integration works with Helix and MATCH today, with Audison, Mosconi and more planned.
  • Made for enthusiasts and installers — a precision upgrade, not a plug-and-play gadget.

Compatible amplifiers today: Helix and MATCH. Support for Audison, Mosconi and more is on the way.

Specifications

The technical details

Audio

Input
Lossless digital tap on the car's audio link
Sample rate
48 kHz · up to 96 kHz (hi-res)
Resolution
Bit-perfect, up to 24-bit
Outputs
2 × optical TOSLINK (S/PDIF), front & rear
Centre channel
Built-in Class-D amplifier

Integration

Vehicle (CAN)
Volume, steering wheel, ignition, parking sensors, speed
Amplifier remote
Helix & MATCH control bus — more brands planned
Operating modes
Mode 1 · Mode 2 · Mode 3 · Auto

Setup & software

Configuration
Browser Configurator over USB — no app needed
Firmware
Field-updatable
Processor
Arm Cortex-M7 audio processor

Compatibility

Head units
BMW iDrive 7, 8 and 8.5
Verified on
BMW X5 (G05)
Power
12 V vehicle supply

Physical & electrical

Dimensions
150 × 110 mm
Idle current
150 mA at 12 V

Optional — Hi-Res Player

Playback
24-bit / 96 kHz from a USB drive
Formats
FLAC · ALAC (Apple Lossless) · WAV · AIFF · MP3
Albums
Single-file albums with CUE sheets

Ready to upgrade your BMW?

Tell us about your car and its sound system and we'll send a tailored quote and fitment notes.

Request a quote