At the top of the application window, you'll find a Broadcast button. When enabled, this mode makes the communication available across your entire local network.
For example, if the main application is running on one computer, and another device is connected to the same local network, that second device can also connect to the vehicle through the network. In this case, the connection should be made to the IP address of the main computer on the local network.
If broadcast mode is turned off, diagnostic tools must be run on the same computer where the main application is running, since the connection will not be visible to other devices on the network.
WARNING: Only enable broadcast mode if you actually intend to access the car from another machine. If you run the tools on the same computer while broadcast mode is enabled, some tools may not function properly.